# Swing arm grinding machine

- Link: https://www.hongbaiweld.com/zh_cn/all-product/robot-series2500.html
- Published: 2025-12-11T13:16:41+08:00
- Author: zhouhui

### PRODUCT INTRODUCTION

The swing-arm regrinding machine’s external communication interface supports hard
I/O ports and multiple bus interfaces (configurable according to site requirements).
Utilizing carbide-coated blades, it enables high-speed regrinding and can simultaneously
regrind the upper and lower electrode caps of the spot welding clamp, ensuring concentric
and perfectly aligned electrode end faces after regrinding. The equipment is equipped
with an automatic copper shavings collector, effectively maintaining a clean and
aesthetically pleasing work area. Its unique swing-arm function allows for flexible
position adjustment within a 90° range, precisely adapting to the electrode cap 
regrinding needs of fixed welding clamps or robotic spot welding clamps, significantly
improving the applicability and automation level of the production line.

![](https://www.hongbaiweld.com/wp-content/uploads/2025/12/2025120806284222.jpg)

**Pneumatic swing arm electrode cap grinding machine**


![](https://www.hongbaiweld.com/wp-content/uploads/2025/12/20251208065945100.jpg)

Product Features:
 A. Standard swing arm height: 2 meters B. Equipped with external
ports to meet various on-site communication requirements C. Uses imported cylinders
to drive the swing arm, allowing for adjustment to any position within 90°, facilitating
the grinding of the electrode cap on the welding clamp D. Standard port configuration:
24VDC PNP type IO; optional Devicenet, Profinet, Profibus, etc.

### Electric swing arm electrode cap grinding machine


![](https://www.hongbaiweld.com/wp-content/uploads/2025/12/2025120807053841.jpg)

Product Features:
 A.380V three-phase motor drive, 280RPM grinding speed B.Standard
swing arm height 1 meter C.Equipped with external ports to meet different on-site
communication requirements D.Uses an imported geared motor to drive the swing arm,
capable of adjusting to any position within 90° to complete the grinding of the 
electrode cap of the welding clamp E. Standard port configuration: 24V DCPNP type
IO; optional Devicenet, Profinet, Profibus, etc.

 