The electrical cabinet manufacturing industry is a major category in the sheet metal manufacturing industry. Generally, the thickness of the sheet metal does not exceed 3mm (most of the sheets are 1 – 2mm thick). It is recommended to use energy storage stud welders.
Welding characteristics of energy storage stud welders:
Shallow molten pool, low requirement for sheet thickness.
Instantaneous welding, minimal thermal deformation of the sheet, and no blackening on the back.
Suitable for a variety of materials, can weld low – carbon steel cold – rolled sheets, stainless steel sheets, aluminum sheets, brass/copper sheets.
Weldable stud specifications: M3 – M10.
Absolutely superior to spot welding and argon arc welding in terms of welding quality.
High welding speed. The manual welding speed can reach 5 – 20 studs per minute, and the automatic welding speed can reach up to 40 studs per minute.
Not only the electrical cabinet manufacturing industry, but also other industries that meet the above stud welding characteristics are also recommended to use it.
In some sheet metal industries, if the sheet thickness is over 2mm, there is no requirement for the back welding marks (double – layer sheets, or the back is hidden and invisible, or there is no impact on post – processing), and there are special requirements for welding strength, such manufacturers can also use arc stud welders.
