2025-12-16
Product Introduction The Automatic Projection Welding Electrode Grinding Machine is a fully automatic electrode grinding machine designed for projection welding machines on automotive body production lines. It can automatically grind projection welding electrodes without manual intervention, automatically avoiding the workpiece during welding and grinding the electrodes after welding, thereby improving the automation rate of the production line. This product uses carbide coated inserts, enabling high-speed grinding and simultaneous grinding of both upper and lower electrodes of the projection welding machine, resulting in a bright and smooth electrode end face after grinding. Product Features High Torque Grinding: Driven by a 380V servo motor, the grinding speed is adjustable, and it can automatically grind projection welding electrodes with a maximum outer diameter of Φ35. Composite Motion Mechanism: Equipped with a lifting and translation slide table, driven by a cross cylinder, it allows the grinding body to perform precise movements in two vertical directions to adapt to actual working conditions, and automatically resets after grinding. Intelligent Buffer Compensation: An internal buffer spring cushions the impact force when the welding clamp tightens, preventing damage to the equipment; it also automatically compensates for distance changes caused by electrode shortening during grinding, preventing over-grinding. Fully Automatic Operation Cycle: Enables a fully automated workflow from avoiding the welding position, moving to the grinding position, applying pressure compensation, grinding, and resetting. Industrial-Grade Communication Integration: Equipped with external ports to meet various field communication requirements; standard ports include Profinet, with optional hardwired I/O.
2025-12-11
PRODUCT INTRODUCTION The swing-arm regrinding machine’s external communication interface supports hard I/O ports and multiple bus interfaces (configurable according to site requirements). Utilizing carbide-coated blades, it enables high-speed regrinding and can simultaneously regrind the upper and lower electrode caps of the spot welding clamp, ensuring concentric and perfectly aligned electrode end faces after regrinding. The equipment is equipped with an automatic copper shavings collector, effectively maintaining a clean and aesthetically pleasing work area. Its unique swing-arm function allows for flexible position adjustment within a 90° range, precisely adapting to the electrode cap regrinding needs of fixed welding clamps or robotic spot welding clamps, significantly improving the applicability and automation level of the production line. Pneumatic swing arm electrode cap grinding machine Product Features: A. Standard swing arm height: 2 meters B. Equipped with external ports to meet various on-site communication requirements C. Uses imported cylinders to drive the swing arm, allowing for adjustment to any position within 90°, facilitating the grinding of the electrode cap on the welding clamp D. Standard port configuration: 24VDC PNP type IO; optional Devicenet, Profinet, Profibus, etc. Electric swing arm electrode cap grinding machine Product Features: A.380V three-phase motor drive, 280RPM grinding speed B.Standard swing arm height 1 meter C.Equipped with external ports to meet different on-site communication requirements D.Uses an imported geared motor to drive the swing arm, capable of adjusting to any position within 90° to complete the grinding of the electrode cap of the welding clamp E. Standard port configuration: 24V DCPNP type IO; optional Devicenet, Profinet, Profibus, etc.
