在线联系
Product Introduction
这 点焊机 is a brand-new resistance welding machine developed and manufactured by our company. Its welding controller adopts the world’s most advanced inverter technology, full-bridge soft-switching technology, and closed-loop current control technology; the welding transformer operates at a frequency of 10kHz and features small size and high energy conversion efficiency. The welding clamp uses an electric servo mechanism, which can adaptively control welding pressure and welding current in real time, resulting in good weld formation and minimal spatter. Especially when welding multi-layer zinc-coated steel plates and high-strength steel plates, it virtually eliminates spatter. This product has obtained four domestic invention patents, fifteen utility model patents, three software copyright certificates, and two international invention patents. This product is suitable for welding ordinary steel plates, zinc-coated steel plates, hot-formed steel plates, high-strength steel plates, and aluminum plates.
Product Features
- The transformer is small in size and lightweight, achieving integrated operation of the transformer and welding gun, and reducing the load requirements of the welding robot.
- Adaptive control of welding pressure and welding current allows a single welding gun to perform welding operations on multiple workpieces of different thicknesses at the same workstation.
- The welding gun servo mechanism can use the hollow electric cylinder (linear electric cylinder) developed by the company, as shown in the figure below; or a detachable electric cylinder, as shown in the figure below.
- The main structure of this robot’s welding gun is precision-machined from aerospace-grade aluminum and high-quality copper, featuring high rigidity, high strength, small deformation, and good conductivity, highlighting the stability and safety performance of the equipment.
- The welding controller has good power grid adaptability and strong anti-interference capability.
- It integrates a wide range of protocol interfaces and can be configured according to user-defined personalized requirements.
- Two main types of welding guns (C-type and X-type) can reliably connect with most domestic and foreign industrial robots to meet the needs of different fields and users.
Product Specifications
| 方面 | 498mm×488mm×468mm |
|---|---|
| 输入特性 | Three-phase 380V±15% 50~60Hz |
| 输出特性 | 540V±15% 10kHz |
| 额定负载电流（A） | 600A |
| Maximum Load Current (A) | 600A |
| 绝缘等级 | F |
| Operating Mode | Welding robot linkage |
| 冷却方式 | Forced air cooling, water cooling |
| 重量 | 50kg |
| Rated Output Power (KW) | 120kW |
| Inverter Frequency (Hz) | 10Hz |
| 额定负载率 | 20% |
| No-load Loss (KW) | ≤0.07kWh |
| 防护等级 | IP54 |
| Welding Clamp Interface (Type C or Type X) | |
| Compatible Transformer Models | BJ3-100, BJ3-130, BJ3-170 |
